The new UEE-G primer
is perfectly compatible with the majority of existing powders in the market
although it reaches maximum results when used with the CSB or PSB powders.
UEE Cartuchería
Deportiva, S.A. is proud to offer the public a product of high
sensitivity, perfect detonation and great consistency. The UEE-G primer consists
of three metal parts (the casing, the capsule and the anvil) and the explosive
paste. Two paper disks are situated over the fulminate and at the exit of the
case.
Our type 209/G-600 primers are packed into trays of 100, and then packaged ten
trays to a box to equal 1,000 per box. Five boxes, totaling 5,000 primers, are
then packaged into a case.
Quality control starts
with the inspection of the basic raw materials, it continues with the electronic
control during the assembly of the primer and extends to the verification of the
finished product. The latter is tested for sensitivity, power, the shape of the
ignition flame and its temperature, the
pressure – time curve and the consistency of these characteristics.
To achieve maximum
performance the primer should be combined with a powder of suitable
characteristics. This way the ignition flame and its temperature will allow the
powder to be ignited progressively and uniformly. This is the reason why these
characteristics are the object of principal attention by our control
laboratories.
